SimScale simulation projects by akash_kumar_ee | Page 1

akash_kumar_ee's profile

Cylinder rotating with vents on its surface

Copper tubes placed in aluminium plate to be used as an Evaporator in VCRS system.

Multiple cooling coils connected to header.

Tutorial project for a thermal analysis of a differential casing. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

The Pipe system contains one inlet and 3 outlets in sequence. The objective is to determine the flow rates from individual outlets and pressure at junctions.

Square CS tube with a slit outlet and circular inlet

Heat Transfer through a PUF panel used to store Ice in ambient condition.

The project objective is to form ice in the shell by passing below zero MEG coolant through the tubes.

Public Profile

akash_kumar_ee's profile