SimScale simulation projects by SeyeAkin | Page 1

SeyeAkin's profile

Calculate the power requirement of an axial fan heater

Computation of the thermal comfort including Local Mean Age of Air and radiation in a meeting room using CFD simulation.

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Simulate cooling using compressed carbon dioxide

CFD to determine recirculation areas and choke regoins

Calculate the maximum Von Mises stress in the pressure chamber. for internal pressure
Static FEA
Determine if the pressure vessel is adequately sized for an internal pressure of 2040psi

Tutorial project for a stress analysis of a connecting rod. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

This project shows the bending of an Aluminium pipe through rolling process.

Calculate the pressure drop across a valve and orifice plate

CFD Filling Chamber with Pressurized Carbon Dioxide

Cooling of a chamber using a Peltier module. Chamber Uninsulated

Determine the maximum stress on the chamber as a result of internal pressure

Heat transfer simulation showing the cooling of a chamber with a peltier

Determine the power required to be removed to cool a chamber being warmed up by natural convection

Tutorial project for a thermal analysis of a differential casing. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

LED Spotlight project, aiming a bring the temperature of the diodes of a LED spotlight design below the maximum allowed temperature of 100C. A Conjugate Heat Transfer v2.0 analysis is used.

Calculate the heat dissipation value required to lower the temperature of the chamber

Heat transfer due to peltier cooling and natural convection

Incompressible Fluid Flow analysis of two globe valves

In this exercise, you will complete a laminar pipe flow analysis

Public Profile

SeyeAkin's profile