SimScale simulation projects by Kowsshikprabu9 | Page 1

Kowsshikprabu9's profile

Tutorial project for a thermal analysis of a differential casing. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

pneumatic cylinder is using to press the seal

In oil seal pressing machine has a oil seal connector it made up of strain less steel

in oil seal pressing machine the pneumatic cylinders to attach the vertical it made up of stainless steel

In bike engine have a magneto coil. in coil is place in the plate have a oil seal to lubricate th crank.  in day to day usage it must be damaged so it will replace after one year. The magneto coil plate is made up of the cast iron

In oil seal pressing machine has a cylinder cap it helps to move the vertical cap and it made up of strain less steel

In oil seal pressing machine has  a component support made up of strainless steel

oil seal pressing machine has a base made up  of strainless steel

Public Profile

Kowsshikprabu9's profile