SimScale simulation projects by Jimbo_Jones | Page 1

Jimbo_Jones's profile

Planter support for flower pots mounted to outside balconies

Stress on plate below vault of Millenium tower fix. The plate is as per the dimensions shown on the drawing. The hole sizes are 2.8125 inch (standard clearance holes for a 2-3/4 inch bolt/threaded rod). The circles around the holes are 0.1mm tall and are used to represent the area that sees the load from the nuts below the plate (based on an actual 2-3/4 inch nut). The center-to-center distance between the holes is 8 inches. This is my best guess as the drawing I saw does not show that dimension.

Obviously, the circles can cause some issues with the FEA analysis.

Not sure what the failure stress of steel is for shear as I usually never need to calculate it.

Cas de chargement maximal, trémie pleine et 1m de surplus

Air flow in a bent pipe with a divergeant exhaust

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Just a simple shelf support designed to be printed on a 3D printer using standard white PLA filament

Larger soap container equals fewer refills required

Static Analysis of  Support Frame to Confirm Stress Loads

Public Profile

Jimbo_Jones's profile