SimScale simulation projects by Dimasahmm | Page 1

Dimasahmm's profile

Aerodynamic study of The 2022 F1 rear wing (Designed in accordance with the 2022 FIA Regulations) - Copy

The goal of the project is to optimize the design of an F1 Rear wing. An incompressible flow simulation will be used with a speed of 10m/s (36km/h) at the inlet and on the floor. 

F1 Rear wings are designed to create more negative lift on the car by deflecting the incoming air and creating flow separation. This serves to reduce the amount of drag experienced by the vehicle which allows to it move faster in a given distance than a vehicle that doesn't possess one. 

Feel free to correct me where I have done wrong and let's discuss this case together! Happy Simulating! - Copy - Copy - Copy - Copy - Copy - Copy

Testing LMP1 Car- Porsche 919 Evo in Aero/Fluid Dynamics way

Test drag coefficient of a Porsche 911 (2016) is 0.29,

I took the Porsche 919 LMP model from another user in simscale and tweaked everything to be able to model the airflow over the vehicle - Copy - Copy

The project goal was to investigate the total downforce generated by the front wing of the 2019 car.
so for this simulation, I will use the incompressible type.
in 2019 F1 season was one of the best overtaking seasons so far. this happen just because of the NEW aerodynamic rule was help the drive to push the car at maximum limit. - Copy

Public Profile

Dimasahmm's profile