SimScale simulation projects by DesignerPaul | Page 1

DesignerPaul's profile

Here is a ROOM with a FAN on the right up against the wall. There are two other locations for the fan 1) Middle of the room 2) in the corner of the room. The fan produces 300CFM through a 200mm Pipe internal diameter. I need to see the degree of turbulence from the pipe in all three locations. Can somebody help me please...this is my first time using SimScale...thanks

Analysis of a standard room with an Air Tabulator in three critical locations to determine the degree of Turbulent Flow

Public Profile

DesignerPaul's profile